Gw13 Outdoor High Voltage Isolating Switch

Lugao takes pride in being Gw13 Outdoor High Voltage Isolating Switch manufacturer,Gw13 Outdoor High Voltage Isolating Switch (GW13-40.5/72.5/126) is comprised of brackets, bases, pillar insulators, contacts, wiring boards, and other essential components. The pillar insulator and the conductive part are mounted on the base, and the two pillar insulators intersect at an angle of 50°. This structural arrangement ensures proper alignment and positioning of the key elements, contributing to the effective functioning of the isolating switch.

Send Inquiry

Product Description

Lugao in being Gw13 Outdoor High Voltage Isolating Switch supplier.The base of the Gw13 Outdoor High Voltage Isolating Switch (GW13-40.5/72.5/126) is securely fixed on a bracket inclined at 25°. A shaft, connected to the operating mechanism, is mounted on this bracket. The switch can be equipped with a CS17G manual operating mechanism, and alternatively, it is adaptable for use with C6 and other electric mechanisms. This design allows for flexibility in the choice of operating mechanisms based on specific operational requirements.

Operating Environment

1. Poster height: no more than 3000m;

2. Ambient temperature: not higher than +40°C, not lower than -30°C; day difference temperature is 15*C;

3. Indoor air relative temperature: no more than 90% (at +25°C);

4. Earthquake intensity: no more than 8 degrees

5. The installation site should be free from gas, vapor chemical deposition, salt spray, dust, dirt and other explosions that seriously affect the insulation and conductivity of the isolating switch substances, aggressive substances;

6. The installation site should be free from frequent violent vibrations