Lugao takes pride in being Gw4 Outdoor High Voltage Isolating Switch manufacturer,GW4 Outdoor High Voltage Isolating Switch comprises a base, an insulating strut, a conductive part, and an operating mechanism.  Each pole is equipped with two pillars, with a conductive knife positioned at the upper end of each pillar.  The knife's contacts are located in the middle of the two pillars.  At the lower ends of the pillars, bearing sleeves are installed.  Driven by the operating mechanism, the knife can be horizontally rotated by 90° to fulfill the opening and closing requirements.

Operating Environment

1. Altitude: no more than 3000m;

2. Ambient air temperature: the upper limit is 40C, the lower limit is -25C;

3. The wind speed does not exceed 35m/s;

4. The earthquake intensity is more than 8 degrees;

5. The contamination level does not exceed Class II;

6. The thickness of ice coating is not more than 10mm;

7. The installation site should be free from flammable and explosive hazards, chemical corrosion and severe vibration.

Factory Shoot

Packaging